Utilize a Pneumatic Forklift
Pneumatic forklifts are common in warehouse and shipping operations. Also called pallet trucks or pump trucks, they are utilized in order to transport things and materials around on wooden pallets utilizing metal forks that are mounted on a wheeled counterweight. The counterweight has a pump which lifts the forks off the ground. A pallet truck is intended to be operated by a single individual.
To be able to prevent loosing control while lifting heavy loads, pallet trucks should always be operated with care. Machine should be inspected before operating. Clear the wheels area of any obstructions. Check that the handle turns smoothly. The pallet must be carefully stacked in order to guarantee that nothing would fall off during transportation.
In order to lower the forks and release air in the pump, squeeze the lever located on the inside of the metal loop on the end of the pallet truck's handle. The forks could then be pushed into the slots of the pallet. The forks should be centered to be able to guarantee even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not raise the pallet too high or the forklift could unbalance.
Pull on the handle and then drag it behind you if you want to move the pallet. It is dangerous to push the pallet in front of you because the thrust can cause it to lose control. Take turns slowly and don't attempt to stop abruptly. Gradually come to a stop, squeeze the lever, and the forks will lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.