Nearly all of the time, companies would spend a lot of money to buy their forklifts. It is important, therefore to take good care of your machinery to protect your investment into the long run. It is a great idea to know the procedures that are undertaken in the maintenance and care of this piece of equipment.
Among the best ways to tell how good the engine is running is by starting the forklift up and listening closely to see how it runs. Like for instance, if there are any knocks or misses, the machine is faulty and this must raise some concerns. Moreover listen closely for any squealing sounds which come from the belts as these noises would provide you with a wealth of information.
When carrying out maintenance, some of the main components you would need to pay attention to comprise the horn, safety warning devices, the overhead guard, the lights and the gauges. Any burnt out light bulbs or faulty parts should be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
After the above components have been checked carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each and every cell of the battery must be inspected in order to make certain that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters have to be replaced on a regular basis. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
After the oil change is done and the filters have been replaced, a visual inspection of the drive axle has to be done. If there is a grease fitting on the axle make certain to apply some grease. Inspect the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. After that, inspect every other part of the machine like the wheels. If any kind of fault or concern is detected, be sure to deal with it immediately in order to make sure the machinery is running at its safest and optimum levels.